Have an USB drive ( flash )? Turn it into an operating install disk for Windows, Linux or Mac, or a diagnostic tool for your PC.
Need to install Windows Vista, 7, and 8.on a computer with no DVD drive? Do you want to create a backup installer in case your install disc becomes damaged?
use Freebuzz Bootable Creator , This Soft will create a USB drive that is bootable. You can then copy the contents of an operating installation disc onto the drive to create a portable installation drive.
1. First plug-in your USB stick to your USB p.o.r.t and copy all the content to a safe location in your hard drive .
2. Run Freebuzz Bootable Creator as an administrator
3. Select The Disk (flash) you wanna Make Bootable
* on select disk be scrupulous because this will fromat selected disk so be sure your selected this is desire usb flash
4. Click Start and Wait Untill Get Finish Result
5. Copy the operating system. Once the USB drive has been made bootable, you can copy over the installation files for the operating system you want to install. You can do this by dragging and dropping using your preferred file manager/explorer. Copy over any drivers you might need during the operating system installation to make the process much smoother. The safest and the fastest way would be to use the Windows Explorer. Open the disk, select everything, and drag it into your flash drive. This could take a few minutes to copy.
6. Change the boot order. To boot from the USB drive, you will have to set the BIOS to boot from USB first instead of the hard drive. To open the BIOS, reset your computer and hit the displayed key to enter Setup. The key varies by manufacturer, but is usually F2, F10, F12, or Del.
* Open the Boot menu in your BIOS. Change the 1st Boot Device to your USB drive. Be sure that it is inserted, or you may not be given an option to choose it. Depending on your manufacturer, it may say Removable Device or list your flash drive’s model.
7.Save changes and reboot. If you set the boot order correctly, your Windows 7 or Vista installation will load after the manufacturer’s logo disappears.
NOTE : This Soft only works in Windows Vista, 7, and 8 ; dont use on other oprating systems.
we Hope this will round your work head khande
tag: Create a Bootable Drive , make bootable flash install windows thru flash, Make a USB Bootable, نصب ویندوز از روی فلش, بوت از روی فلش , بوت ابل کردن فلش , قابل بوت کردن یو اس بی فلش ,
[You must be registered and logged in to see this link.]